Standalone Access Controller RAC-920PE/PM

Standalone Access Controller RAC-920PE/PM
Standalone Access Controller RAC-920PE/PM Standalone Access Controller RAC-920PE/PM Standalone Access Controller RAC-920PE/PM
Availability: Out Of Stock
Quantity: 0 pcs
Add To Compare | Add To Wishlist

Standalone Access Controller RAC-920PE/PM


  • Support network or standalone operation.
  • Memory capacity 1,024 cardholders / 800 events.
  • Watchdog function secures system free from halting.
  • Able to connect external slave reader type T1/T2.
  • Conditional Unlock Door function, able open 1~9,999 seconds per time.
  • Provide RS-485 communication, able expandable to 64 sets by RS-485 interface.
  • Reader tamper proof detection and door tamper alarm. Programmable door sensor detection time from 1~600 seconds and able set relay or reader beep of alarm type.
  • Slim, stylish design, sensitive touch keypad with blue backlight suit for various locations.
  • Duress card / code setting. When door opened in the emergency, controller will send signal to control center at the same time for tracing and rescue.
  • Unique ID or Block reading format supported and programmable key value. (RAC-920PM)
  • Support swipe card and card with pin codes enter modes and door relay time from 1~600 seconds.
  • Specificatios

    Model No.



    Read Format

    EM (125KHz)

    Mifare-1 (13.56MHz )

    Read Range

    8-10 cm (max )

    3-5 cm (max )

    Slave Reader

    T2 ( 1 Set )

    Input Port

    3 Sensors (Door Sensor x 1Exit Button x 1Case Sensor x 1);

    Output Port 

    Relay x 1 (Door Lock or Bell )

    Output Port (External)

    O.C. Output x 2 ( Door Lock / Alarm or Siren , external ACU-30 )


    1,024 / 800



    Fingerprint Capacity

    950 user capacity. ( 2 fingerprint templates per person)

    Identification Mode

    11 / 1N

    Identification Time

    11 <= 1 sec. 11,000 <= 1 sec.





    Fingerprint Sensor

    Optical CMOS Sensor

    LED Indicator

    Power / Comm.

    LCD Display

    128 x 64 Dot. Graphic Display with backlight


    17 Key (F1-F4, 0-9, , , Bell) (Sensitive Touch Keypad)

    Real Time Clock


    Beep Tone

    Buzzer & Operating steps sound

    ID or IP Setting

    Command setting by keypad

    Power Input

    DC 12V / 1A

    Current Consumption

    250mA. ( max. )

    Comm. Interface

    RS-485 TCP/IP

    Comm. Baudrate

    19,200 bps-N-8-1

    Operating Temp.

    -10° C ~ 70° C / 14° F ~ 158° F

    Relative Humidity

    20% ~ 80%(Non-condensing)


    120mm(L) x 77mm(W) x 22mm(H)

    Weight (Device)


    There are no reviews for this product.


    Please click here to login to your account to write review.

    (try our advanced search)